Davinci EVM Support Home (Revision F)
This is the primary location for all Davinci EVM related documentation, notes and errata. DaVinci EVM refers to the development board only. It is included with TI's DM644X Digital Video Evaluation Module, which includes a number of other components. Please look here for full details of that kit.
Current DaVinci EVM Documentation
| Description |
Link |
DaVinci EVM Frequently Asked Questions
Questions and comments from EVM users. |
FAQ |
DaVinci EVM Quick Start Guide
A quick introduction to your board. |
PDF - 5/12/06 |
DaVinci EVM Technical Reference
Board details, jumper settings and pinouts. |
PDF - 04/19/07 |
DaVinci EVM Schematics
Schematic drawings. (PDF) |
PDF - 04/19/07 |
DaVinci EVM BOM
Bill of materials. (PDF) |
PDF - 04/19/07 |
DaVinci EVM Gerber
PCB Gerber layout. (PDF) |
PDF - 04/19/07 |
DaVinci Orcad Symbol
Orcad Schematic Symbol. |
Download (DSN) - 12/09/05 |
DaVinci EVM Software Resources
| Description |
Link |
DaVinci EVM ARM GEL file
GEL for ARM9: sets PLL, PinMux, DDR2, & EMIF. |
Download (ARM9 GEL) - 03/02/07 |
DaVinci EVM DSP GEL file
GEL for C64x+ DSP |
Download (C64x+ GEL) - 03/02/07 |
DaVinci EVM Set MAC address
Stand alone COFF file for programming the DaVinci EVM MAC address. Requires the DaVinci ARM9 GEL file. |
Download (OUT) - 03/05/07 |
DaVinci EVM U-Boot Recovery
| Description |
Link |
U-Boot Flashing Insructions
Instructions on how to restore or replace the U-Boot bootloader in Flash through Code Composer Studio. |
Instructions (PDF) - 03/30/06 |
NOR FlashWriter Support Files
Files needed for loading binary images into NOR Flash. |
Download (ZIP) - 03/30/06 |
NAND FlashWriter Support Files
Files needed for loading binary images into NAND Flash. |
Download (ZIP) - 03/30/06 |
DaVinci EVM MSP430 Resources
| Description |
Link |
Firmware Programming File
Shipping version of MSP430 firmware (Rev F board). |
Firmware ( .d43 ) - 03/02/07 |
Firmware Source Code
Shipping version of MSP430 firmware (Rev F board). |
Firmware ( ZIP ) - 03/02/07 |
MSP430 I2C Commands
List of supported I2C commands |
TXT - 03/02/07 |
RC5 Format
Infrared Remote Control signal format |
Webpage |
RC5 Codes
Infrared Remote Control codes |
PDF |
IAR Embedded Workbench
Compilers/Assemblers/Linkers for MSP430 |
Webpage |
DaVinci EVM CPLD Contents
| Description |
Link |
VHDL Project for Rev F EVMs
This is the version that is shipped in the Altera Max II CPLD on the Rev F EVMs. Built with Quartus 5.0 SP1. |
ZIP - 11/16/05 |
DaVinci EVM Components
|
